Product Name

• Texturglas® System Solutions for Walls Architectural Wall Finish Systems
• Texturglas® is a registered trademark of
  • Roos International, Ltd. Inc.  
  • 1020 NW 6th Street, Suite H  
  • Deerfield Beach, Florida 33442
  • (800) 888-2776  (954) 429-3883
  • Fax (954) 429-8208
  • E-mail:  support@roosintl.com
  • Website: www.texturglas.com

Product Description

• Material: Non-woven glass fiber mats.
• Purpose:
  • Used as a reinforcement for smooth painted finishes.
  • Serves as a wallcovering liner to minimize wall repair needs.
• Thickness: Ranges from 3 different weights depending on surface coverage needs.
• Applicable Surfaces: Designed for diverse surfaces, including:
  • Brick
  • Wood paneling
  • Laminate
  • Ceramic tile
  • Cement block
  • Textured walls
  • Damaged walls

Features & Benefits

• Covers Rough Walls: Recommended to test a sample to determine if it sufficiently masks imperfections.
• Dimensional Stability: Does not shrink, stretch, or deteriorate.
• Mold & Mildew Resistant: Breathable and does not contribute to mold growth.
• Ease of Installation:
  • Apply to a primed surface using a wall adhesive.
  • Finish with either latex, acrylic, or epoxy paint for durability.
• Enhanced Durability: Can be painted for reinforcement on cracked plastered walls and ceilings.

Limitations

• Not for Exterior Use: Unless embedded in an exterior stucco or coated with a protective outdoor material.Requires Surface Prep:
  • Masonry block requires level joints.
  • Surfaces must be properly prepared before application
  Pattern Suitability: Some patterns may not be suitable for high-impact areas (e.g., behind appliances or railings).

Technical Data

• ‍Applicable Standards‍
  • Standards Council of Canada Standard Test Method for Surface Burning Characteristics CAN/ULC-S102-M88
  • American Society for Testing and Materials ASTM E84-01 Standard Test Method for Surface Burning Characteristics of Building Materials
  • ASTME96 Standard Test Method for Water Vapour Transmission
  • NFPA 255 Standard Method of Test of Surface Burning Characteristics of Building Materials Oko-Tex
  • Standard 100 Confidence in Textile, Section 108 for Textile Wall Coverings
• Environmental Considerations
  • Texturglas is made from all natural, non-toxic materials.  It does not require replacement for redecoration and can be renewed with a paint finish. Glass textile wallcovering meets State of Washington Indoor Air Quality Program requirements, and meets U.S. Environmental Protection Agency National Ambient Air Quality Standards. Listed in GreenSpec® Directory and has a third party evaluation describing how it can contribute towards LEED credits.
• Physical/Chemical Properties
  • Glass textile wallcovering is made from glass yarns woven into various textures. Tensile strength of warp ranges from 74 lbs/in to 262 lbs/in and of weft from 39 lbs/in to 180 lbs/in. Weight of the material ranges from 3.5 oz/sq.yd. to 8.11 oz/sq.yd. Woven glass textile is a porous product that allows the migration of water vapor. See Technical Summary for information on each individual pattern.
• Fire Rating
  • Class A fire rating.  Glass textile does not support combustion.  When tested in accordance with CAN/ULC-S102-M88: Flame Spread 5, Smoke Development 5. When tested in accordance with ASTM E84: Flame Spread 5, Smoke Development 0.
• Permeability
  • Glass textile is a porous product that allows the migration of water vapor even after painting. Test results under ASTM E96 Standard Test Method for Water Vapour Transmission: 400-555 g/m2/24hr.

Availability and Cost

• Availability
  • Texturglas is available from stock and can be shipped within 72 hours. Contact your local paint store or wallcovering distributor or call Roos International, Ltd. Inc at 954-429-3883.
• Cost
  • Texturglas is priced by the yard and is painted after installation. Cost to install the wallcovering is comparable to commercial vinyl wallcovering. Contact your local paint store or wallcovering distributor for pricing or call Roos International.

Warranty

• The manufacturer warrants that for a period of five (5) years from the date of shipment that its glass textile wallcovering products will conform to their product specifications and will be free of defects in exceeding of those permitted by their product specifications. ROOS INTERNATIONAL DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  If any products sold by Roos International, Ltd. fail to conform to the above warranty, the manufacturer will supply replacement product free of charge and does not include labor for removal or installation. The supply of replacement product is the exclusive remedy and is the limit of Roos International, Ltd.'s or the manufacturer's liability.  In no event shall Roos International, Ltd. or manufacturer be liable for incidental or consequential damages.

Maintenance

• Because Texturglas is painted after installation, it is washable according to paint manufacturer’s recommendations. If damaged, it can be touched up with paint or repaired with a double cut patch and repair method. It can be repainted up to 8 times. Estimated service life is over 30 years.

Technical Services

• For technical assistance, contact Roos International at 1-800-888-2776. Also visit the website at www.roosintl.com.

Filing System

• Additional product information is available from Roos International, Ltd. Inc. at 1-800-888-2776. Also visit the website at www.roosintl.com.

Texturglas Specification

Texturglas Installation Instructions

Acoustiver Installation (English)

Acoustiver Installation (Spanish)

Wall Restoration Instructions (GV45, GV250 patterns ONLY)

Applications for Renovation and New Construction

Wall Restoration System Brochure

Technical Summary

Repair Instructions

Case Study: Glenwood Hospital

Intertek: Fire Test Report

Intertek: Fire Test Report (Nonwoven Glass Fiber)

Intertek: Fire Test Report (Woven Glass Fiber)

Commercial Testing Company: Fire Test Report

Mold-X Brochure