.png)
Laminates and Veneers
.jpg)
.png)
.png)
.jpeg)
Login
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Create Account
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Three inch slats with one inch spaces. The products below are faced with Lab Design Laminates. While real wood veneer (Barnwood) is possible, this laminate facing option gives designers a uniform look from panel to panel. Any high pressure laminate will work!
Akupanel 3x1 is available with any available Resonance Acoustic color as a base panel, any ForesColor or MDF for a middle layer, and a wood veneer, high pressure laminate or a phenolic backed metal laminate to face the panel.
*Please note if real wood veneers are used: Barnwood wood veneers are not selected from individual flitches, therefore variations in color, grain, texture, and figure will occur. Panel alignment within a given pattern cannot be guaranteed from panel to panel. it is the responsibility of the design professional to incorporate frames, reveals, etc… as needed to achieve the desired effect. High pressure laminatate may be used for more consistent colors, grains, textures, etc.
Size: 24” x 96” Thickness: 22mm (.866”)
Fire Test: The PET backer has a Flame Spread Index of 0 and a Smoke Developed Index of 350. The black thru colored MDF has a Flame Spread Index of 15 and a Smoke Developed Index of 5. Class A classification has Flame Spread Index of 0-25 with Smoke Developed Index of 0-450.
Acoustic Rating: Akupanel from Acoustical Art Concepts is an optimal solution for efficient sound absorption and lowering noise reverberation time. As seen in the graph below, the panel obtains a Noise Reduction Coefficient of 0.52 at a frequency of 1,000HZ. Loud speech and “regular” noise in the home is typically between 500-2,000HZ.
Recycled Material: Our PET polyester fiber panels are made from 50% recycled plastic and are 100% recyclable.
Cleaning: PET: Spot clean using a mild water-free solvent, or dry cleaning product. Slats/Facing: Wipe with a clean cloth and standard (non-clorine and non-amonia based) cleaner. Clean only in a well ventilated room and avoid any product containing Carbon Tetra-chloride or other toxic materials. Do not use anything more abrasive than a cotton cloth on any part of the panel.