The Exclusive Materials Candy Store
.png)
These fresh and unique designs transform any space – re-imagining ‘everyday’ with color, texture, and dimension. OctoTerra uses recycled galvanized metal and solid wood to create handmade decorative panels.
OTM01-OTM07 use coconut shell that is either polished, or left in its natural state, which is then bonded to a mesh backing. Standard sheet sizes are 24 x 24″.
OTP21-OTP24 use palm wood that are hand cut , arranged and bonded to a plywood substrate. Standard panel size is 48 x 48″.
OTP25 and OTP26 use thin slices of tree branches which are arranged and bonded to a plywood substrate. Standard panel size is 48 x 48″. OTP26 has a resin fill in to create a totally smooth surface, perfect for applications such as table and bar tops. OPT25 has no resin fill.
OTP27-OTP34 are our newest additions, and feature sections of varying height and length to create a 3 dimensional effect.
OTP27 is made from recycled galvanized metal, and is treated with a lacquer to prevent any further oxidation.
OTP28-30 use solid oak, and are supplied unfinished. It is strongly recommended to finish these panels with a sealer, stain ( if appropriate ) and lacquer. To achieve Class 1 fire ratings, a number of commercially available fire rated lacquers can be used.
OTM 14/16/18/20/21 are delivered with a factory applied finish.
OTM 15/17/19/22 are natural white oak and can be stained and finished to a customer’s specifications by the installing contractor.
OTM series designs can be used outdoors in protected areas; however, a protective finish needs to be applied. Sheet Dimensions: 24” X 48” PANELS
.JPEG)
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Alternating 9.80" and 1.06" slats, 0.5" space gap. Two slats for each size per panel.
The same veneer/laminate that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 2.480" and 1.06" slats, 0.25" space gap. Six (6) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Alternating 4.480" and 1.06" slats, 0.25" space gap. Four slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
Thirteen 1.06" slats, one 2.498" slat in middle, 0.50" space gap. Fifteen (total) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
ALSO NEW: Along with the newest additions to the Akupanel Fusion collection, we've added Horizontal Slatted Panel Designs.
With this look, we will have quite a few combinations of options for you – 18 to be exact. You can choose the width of both the “solid” panel AND the “slatted” panel. This means that these are made differently than all the previous versions of Akupanel. The solid area will be a single panel with its own PET backing, and all of the horizontal slats are applied to another backer separately. This means that each job will be unique, with color & layout combinations – and we’ll have to determine how many solid panels and slatted panels are needed to create a continuous look for the job. We’ll also recommend reveals on any area over 94 ½” tall working with solid veneered panels. When it comes to options, here is what you can expect for the layouts. To download a PDF of each layout, click here.
Solid Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Horizontal Slatted Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Slatted Panel Options: 1” slats & 3” slats (spacing of slats is not customizable at this time)
Specifications
These fresh and unique designs transform any space – re-imagining ‘everyday’ with color, texture, and dimension. OctoTerra uses recycled galvanized metal and solid wood to create handmade decorative panels.
OTM01-OTM07 use coconut shell that is either polished, or left in its natural state, which is then bonded to a mesh backing. Standard sheet sizes are 24 x 24″.
OTP21-OTP24 use palm wood that are hand cut , arranged and bonded to a plywood substrate. Standard panel size is 48 x 48″.
OTP25 and OTP26 use thin slices of tree branches which are arranged and bonded to a plywood substrate. Standard panel size is 48 x 48″. OTP26 has a resin fill in to create a totally smooth surface, perfect for applications such as table and bar tops. OPT25 has no resin fill.
OTP27-OTP34 are our newest additions, and feature sections of varying height and length to create a 3 dimensional effect.
OTP27 is made from recycled galvanized metal, and is treated with a lacquer to prevent any further oxidation.
OTP28-30 use solid oak, and are supplied unfinished. It is strongly recommended to finish these panels with a sealer, stain ( if appropriate ) and lacquer. To achieve Class 1 fire ratings, a number of commercially available fire rated lacquers can be used.
OTM 14/16/18/20/21 are delivered with a factory applied finish.
OTM 15/17/19/22 are natural white oak and can be stained and finished to a customer’s specifications by the installing contractor.
OTM series designs can be used outdoors in protected areas; however, a protective finish needs to be applied. Sheet Dimensions: 24” X 48” PANELS
NEW: We’re happy to announce a newer additions of Akupanel Fusion that will have multiple style options, configurations and color choice combinations. In addition, new models that can utilize horizontal slats in tandem with larger solid veneer-covered blocks
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5Mx1.0
13 1.06" Slats
1 2.498" Slat in middle
1/2" gap
Akupanel 4.5x1.0
Alternating 4.480" and 1.06" Slats
1/4" gap
4 slats each size
Akupanel 10 x 1.0
Alternating 9.80" and 1.06" Slats
1/2" gap
2 slats each size
Specifications
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Name | Dimensions |
|---|---|
| Pictura Edge Trim | 3/4" x 3/4" x 84" inches |
| Pictura Baseboard | 3/4" x 4" x 84" inches |
| Pictura Exterior Corner | 3/4" x 2-1/4" x 84" inches |
| Pictura Interior Corner | 3/4" x 2-1/4" x 84" inches |
Weight, coverage and dimensions may vary depending on finish and the natural expansion and contraction of wood.
Fire retardant add-on is available, contact us for a quote.
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Name | Dimensions |
|---|---|
| Intervals Edge | 3/4" x 1" x 108" inches |
| Intervals Baseboard | 1" x 4" x 108" inches |
| Interbals Exterior Corner | 1" x 2-1/2" x 108" inches |
| Intervals Interior Corner | 1" x 2-1/2" x 108" inches |
| Name | Dimensions |
|---|---|
| Intervals Edge | 3/4" x 1" x 119" inches |
| Intervals Baseboard | 1" x 4" x 119" inches |
| Interbals Exterior Corner | 1" x 2-1/2" x 119" inches |
| Intervals Interior Corner | 1" x 2-1/2" x 119" inches |
Weight, coverage and dimensions may vary depending on finish and the natural expansion and contraction of wood.
Fire retardant add-on is available, contact us for a quote.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Alternating 9.80" and 1.06" slats, 0.5" space gap. Two slats for each size per panel.
The same veneer/laminate that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 2.480" and 1.06" slats, 0.25" space gap. Six (6) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 4.480" and 1.06" slats, 0.25" space gap. Four slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Thirteen 1.06" slats, one 2.498" slat in middle, 0.50" space gap. Fifteen (total) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
ALSO NEW: Along with the newest additions to the Akupanel Fusion collection, we've added Horizontal Slatted Panel Designs.
With this look, we will have quite a few combinations of options for you – 18 to be exact. You can choose the width of both the “solid” panel AND the “slatted” panel. This means that these are made differently than all the previous versions of Akupanel. The solid area will be a single panel with its own PET backing, and all of the horizontal slats are applied to another backer separately. This means that each job will be unique, with color & layout combinations – and we’ll have to determine how many solid panels and slatted panels are needed to create a continuous look for the job. We’ll also recommend reveals on any area over 94 ½” tall working with solid veneered panels. When it comes to options, here is what you can expect for the layouts. To download a PDF of each layout, click here.
Solid Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Horizontal Slatted Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Slatted Panel Options: 1” slats & 3” slats (spacing of slats is not customizable at this time)
Dimensions: 23 5/8” x 94 ½” (600mm x 2400mm)
Thickness: 13/16” (20mm)
Backing: PET Polyester Fiber
Core: MDF (Medium Density Fiberboard)
Facing: Natural Wood Veneer
Akupanels are available in 10 natural wood veneer finishes: Smoked Oak, Brown Oak, Natural Oak, Grey Oak, Walnut, Recon Grey, Recon Maple, Black Ash, Classic Oak, Carolina Oak
Yes! Akupanels are designed for easy installation on both walls and ceilings. They can be mounted using screws, adhesives, or mounting clips, depending on the surface and installation preferences.
Ceiling installations: Provide excellent sound absorption for acoustically optimized spaces.
Wall installations: Add both decorative appeal and acoustic control, making them perfect for home theaters, offices, restaurants, or conference rooms.
Noise Reduction Coefficient (NRC): 0.97
This high NRC rating ensures effective sound absorption, improving acoustics in any room.
The PET core and wooden substrate materials can be ordered and treated as Class A for fire resistance, meeting strict fire safety standards.
PET Polyester Fiber Backing: Spot clean using a mild, water-free solvent or dry-cleaning product.
Wood Veneer Slats/Facing: Wipe with a clean cloth and a non-chlorine, non-ammonia-based cleaner. Ensure the cleaning area is well-ventilated. Avoid products containing Carbon Tetra-chloride or other toxic materials.Use only soft materials, like cotton cloths, to prevent surface damage.
Yes! Akupanels are now available with: High-Pressure Laminates (HPL) from Lab Designs or Phenolic-backed metal laminates from Specified Metals
Yes, the same veneer used on the Akupanel face can be sold separately to complement your design.
Natural Variations: Each veneer has unique color, grain, and texture patterns.
Panel Matching: Exact end-to-end alignment across multiple panels cannot be guaranteed.
Color Variations: Slight color differences between panels are expected and enhance the natural look.
Yes, the Akupanel Profile Wrapped features 15 slats, each now encased in wrapped foils to conceal the MDF core, enhancing both aesthetics and durability.
Absolutely! Akupanels combine superior sound absorption, Class A fire resistance with Akupanel Contract, and stylish veneer options, making them ideal for commercial environments.
.png)
.png)
