The Exclusive Materials Candy Store
.png)
There is an increasing demand for extra capacity all over the world and with time-pressure high, solutions such as Clicwall are looking increasingly attractive for everywhere from commercial interiors to schools and public facilities.
ClicWall is a Melamine faced and non-structural MDF board with a “Click” profile, available in an extensive range of high-quality designs. ClicWall is suitable for dry conditions, mainly used for wall partitions and wall systems, made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry management.
ClicWall’s patented profile allows the panels to click together easily for rapid installation. No further finishing is required, helping to keep dust and dirt to a minimum during installation. With ClicWall, you can give an existing room an entirely new look and feel without lengthy, unpleasant interruptions to your daily activities. A wide range of accessories is available, including corner profiles and skirting boards, to give your walls that final finish. Put simply, ClicWall gives your interior a complete makeover in next to no time.
Clicwall combines unrivalled ease of installation with aesthetics thanks to a wide range of decors and accessories. All decors are also available as boards for furniture applications.
.JPEG)
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Alternating 9.80" and 1.06" slats, 0.5" space gap. Two slats for each size per panel.
The same veneer/laminate that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 2.480" and 1.06" slats, 0.25" space gap. Six (6) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Alternating 4.480" and 1.06" slats, 0.25" space gap. Four slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
Thirteen 1.06" slats, one 2.498" slat in middle, 0.50" space gap. Fifteen (total) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
ALSO NEW: Along with the newest additions to the Akupanel Fusion collection, we've added Horizontal Slatted Panel Designs.
With this look, we will have quite a few combinations of options for you – 18 to be exact. You can choose the width of both the “solid” panel AND the “slatted” panel. This means that these are made differently than all the previous versions of Akupanel. The solid area will be a single panel with its own PET backing, and all of the horizontal slats are applied to another backer separately. This means that each job will be unique, with color & layout combinations – and we’ll have to determine how many solid panels and slatted panels are needed to create a continuous look for the job. We’ll also recommend reveals on any area over 94 ½” tall working with solid veneered panels. When it comes to options, here is what you can expect for the layouts. To download a PDF of each layout, click here.
Solid Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Horizontal Slatted Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Slatted Panel Options: 1” slats & 3” slats (spacing of slats is not customizable at this time)
• Standard Density
• Faster Installation Time
• Exceptional Scratch and Impact Resistance - Outstanding Durability
• 100% Recovered Wood
• Standard Size: 109.65″ X 23.6″
• Available in 0.4" thickness
• Tongue and Groove installation
• 17 patterns available from stock
There is an increasing demand for extra capacity all over the world and with time-pressure high, solutions such as Clicwall are looking increasingly attractive for everywhere from commercial interiors to schools and public facilities.
ClicWall is a Melamine faced and non-structural MDF board with a “Click” profile, available in an extensive range of high-quality designs. ClicWall is suitable for dry conditions, mainly used for wall partitions and wall systems, made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry management.
ClicWall’s patented profile allows the panels to click together easily for rapid installation. No further finishing is required, helping to keep dust and dirt to a minimum during installation. With ClicWall, you can give an existing room an entirely new look and feel without lengthy, unpleasant interruptions to your daily activities. A wide range of accessories is available, including corner profiles and skirting boards, to give your walls that final finish. Put simply, ClicWall gives your interior a complete makeover in next to no time.
Clicwall combines unrivalled ease of installation with aesthetics thanks to a wide range of decors and accessories. All decors are also available as boards for furniture applications.
NEW: We’re happy to announce a newer additions of Akupanel Fusion that will have multiple style options, configurations and color choice combinations. In addition, new models that can utilize horizontal slats in tandem with larger solid veneer-covered blocks
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5Mx1.0
13 1.06" Slats
1 2.498" Slat in middle
1/2" gap
Akupanel 4.5x1.0
Alternating 4.480" and 1.06" Slats
1/4" gap
4 slats each size
Akupanel 10 x 1.0
Alternating 9.80" and 1.06" Slats
1/2" gap
2 slats each size
• Standard Density
• Faster Installation Time
• Exceptional Scratch and Impact Resistance - Outstanding Durability
• 100% Recovered Wood
• Standard Size: 109.65″ X 23.6″
• Available in 0.4" thickness
• Tongue and Groove installation
• 17 patterns available from stock
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Name | Dimensions |
|---|---|
| Pictura Edge Trim | 3/4" x 3/4" x 84" inches |
| Pictura Baseboard | 3/4" x 4" x 84" inches |
| Pictura Exterior Corner | 3/4" x 2-1/4" x 84" inches |
| Pictura Interior Corner | 3/4" x 2-1/4" x 84" inches |
Weight, coverage and dimensions may vary depending on finish and the natural expansion and contraction of wood.
Fire retardant add-on is available, contact us for a quote.
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Name | Dimensions |
|---|---|
| Intervals Edge | 3/4" x 1" x 108" inches |
| Intervals Baseboard | 1" x 4" x 108" inches |
| Interbals Exterior Corner | 1" x 2-1/2" x 108" inches |
| Intervals Interior Corner | 1" x 2-1/2" x 108" inches |
| Name | Dimensions |
|---|---|
| Intervals Edge | 3/4" x 1" x 119" inches |
| Intervals Baseboard | 1" x 4" x 119" inches |
| Interbals Exterior Corner | 1" x 2-1/2" x 119" inches |
| Intervals Interior Corner | 1" x 2-1/2" x 119" inches |
Weight, coverage and dimensions may vary depending on finish and the natural expansion and contraction of wood.
Fire retardant add-on is available, contact us for a quote.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Alternating 9.80" and 1.06" slats, 0.5" space gap. Two slats for each size per panel.
The same veneer/laminate that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 2.480" and 1.06" slats, 0.25" space gap. Six (6) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 4.480" and 1.06" slats, 0.25" space gap. Four slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Thirteen 1.06" slats, one 2.498" slat in middle, 0.50" space gap. Fifteen (total) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
ALSO NEW: Along with the newest additions to the Akupanel Fusion collection, we've added Horizontal Slatted Panel Designs.
With this look, we will have quite a few combinations of options for you – 18 to be exact. You can choose the width of both the “solid” panel AND the “slatted” panel. This means that these are made differently than all the previous versions of Akupanel. The solid area will be a single panel with its own PET backing, and all of the horizontal slats are applied to another backer separately. This means that each job will be unique, with color & layout combinations – and we’ll have to determine how many solid panels and slatted panels are needed to create a continuous look for the job. We’ll also recommend reveals on any area over 94 ½” tall working with solid veneered panels. When it comes to options, here is what you can expect for the layouts. To download a PDF of each layout, click here.
Solid Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Horizontal Slatted Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Slatted Panel Options: 1” slats & 3” slats (spacing of slats is not customizable at this time)
Dimensions: 23 5/8” x 94 ½” (600mm x 2400mm)
Thickness: 13/16” (20mm)
Backing: PET Polyester Fiber
Core: MDF (Medium Density Fiberboard)
Facing: Natural Wood Veneer
Akupanels are available in 10 natural wood veneer finishes: Smoked Oak, Brown Oak, Natural Oak, Grey Oak, Walnut, Recon Grey, Recon Maple, Black Ash, Classic Oak, Carolina Oak
Yes! Akupanels are designed for easy installation on both walls and ceilings. They can be mounted using screws, adhesives, or mounting clips, depending on the surface and installation preferences.
Ceiling installations: Provide excellent sound absorption for acoustically optimized spaces.
Wall installations: Add both decorative appeal and acoustic control, making them perfect for home theaters, offices, restaurants, or conference rooms.
Noise Reduction Coefficient (NRC): 0.97
This high NRC rating ensures effective sound absorption, improving acoustics in any room.
The PET core and wooden substrate materials can be ordered and treated as Class A for fire resistance, meeting strict fire safety standards.
PET Polyester Fiber Backing: Spot clean using a mild, water-free solvent or dry-cleaning product.
Wood Veneer Slats/Facing: Wipe with a clean cloth and a non-chlorine, non-ammonia-based cleaner. Ensure the cleaning area is well-ventilated. Avoid products containing Carbon Tetra-chloride or other toxic materials.Use only soft materials, like cotton cloths, to prevent surface damage.
Yes! Akupanels are now available with: High-Pressure Laminates (HPL) from Lab Designs or Phenolic-backed metal laminates from Specified Metals
Yes, the same veneer used on the Akupanel face can be sold separately to complement your design.
Natural Variations: Each veneer has unique color, grain, and texture patterns.
Panel Matching: Exact end-to-end alignment across multiple panels cannot be guaranteed.
Color Variations: Slight color differences between panels are expected and enhance the natural look.
Yes, the Akupanel Profile Wrapped features 15 slats, each now encased in wrapped foils to conceal the MDF core, enhancing both aesthetics and durability.
Absolutely! Akupanels combine superior sound absorption, Class A fire resistance with Akupanel Contract, and stylish veneer options, making them ideal for commercial environments.
.png)
.png)
